my new boat

Jim Foot launched his Didi Sport 15 (DS15) a few months ago. After initial photos and reports Jim went quiet. I suspect that he busied himself with regular sailing to learn the characteristics of his new boat, to understand how she likes to be handled in a range of conditions.

Today Jim has sent another report, detailing his sailing this past weekend. He sailed on Algoa Bay, off Port Elizabeth, sailing in sportboat mode with the lead bulb on the keel. Starting with light breezes, it rapidly changed to 35-40 knots, as happens pretty regularly in this part of the world. Unperturbed by the gale force conditions, Jim and his crew Thomas Ochabski put in a reef, left the big asymmetrical stowed in its bag and carried on sailing. Jim says that there was a keelboat in attendance in case of mishap, which gave him the bravado to carry on sailing.

DS15 "Bateleur" about to get wet for the first time.

 Here are extracts from Jim's own words about his experience with "Bateleur" in these conditions.

Beat back to harbour (from about 2 nm offshore) and then had a blast reaching around for about an hour or more.   Great fun.   Naah, understatement, awesome, awesome fun!

For the first time really felt that things were a step up on the speed stakes.   When I was building the boat I imagined a mini Volvo 60 with associated responsiveness and upwind speed. And this is what I felt the boat was achieving.

He promises some GoPro video by the end of the week.

And what about light wind speed? More words from Jim.

The other thing, the boat is incredibly fast in very light winds with weight forward. Everyone who has sailed her in light conditions (<6 kts) has remarked about this characteristic.  Thanks Dudley for a great design.

To see more of this and our other designs, visit our main website or  mobile website

This time last week we were in Connecticut,  participating in the 24th annual Wooden Boat Show at Mystic Seaport. We drove there with two boats in tow, the Paper Jet prototype that we have exhibited the past few years, and the prototype of our new Inlet Runner 16 garvey powerboat design. Sorry, no hyperlink for that one yet, I am still working on the design package.

Paper Jet and Inlet Runner 16 nested for long-distance travels.

The Inlet Runner was built by Kevin Agee and exhibited by him in the "I Built it Myself" section of the show. As a first-time amateur boatbuilder with little woodworking experience, he made such a great job of his project that he took 2nd place in the amateur-built powerboat division, winning the Honourable Mention Award. Congratulations to Kevin for a job well done. I helped out at the end of the project with a bit of sanding but Kevin did everything else himself.

Inlet Runner in the "I Built it Myself" section of the Wooden Boat Show.

The Inlet Runner has my interpretation of a classic garvey hull.

 The Inlet Runner received a lot of interest and we have a few builders waiting for completion of the plans. Also a few requests for both bigger and smaller versions of the same concept. Watch for those on this blog in the next year or two but they must wait in line behind other projects that are currently in progress.

This boat has side seats aft and foredeck with lockers under for stowage, icebox, bait well etc. It also has a self-draining wet deck that can be left clear for fishing space or fitted with a swivel seat for flat-water fishing. We will also offer a Jonboat format with transverse seats and a centre console format on the wet deck.

Deck layout of Inlet Runner, set up for flat water fishing.

Overall, a successful show for us. Thank you Wooden Boat Publications, for organising this show for the benefit of lovers of wooden boats of all types. I look forward to being there again in 2016.

To see our full range of designs, please visit http://dixdesign.com or, for the mobile viewers, http://dixdesign.com/mobile

Summer heat is setting in and minds are turning to activities that can keep us cool. Time for us to get out on the water and go boating.

Time also for the Wooden Boat Show, which takes us north on a 500 mile road trip from the rapidly over-heating Virginia to the somewhat cooler climes of New England, more particularly the very beautiful Mystic Seaport. I must admit that in June/July I think that part of Connecticut must be a great place to live. Then I think about how much I dislike the (much milder) cold of a Virginia winter and know that I was built for much more tropical places.

The Wooden Boat Show  will be 26-28 June and we will once again be exhibiting our bright yellow Paper Jet prototype. Close by, in the "I Built It Myself" section, will be the prototype of our new 16ft garvey design. This is "Inlet Runner", exhibited by amateur builder Kevin Agee of Hampton, Virginia. He is working long hours into the night to get it finished in time for the show. It will be showing off its very fresh paint job. Never having built a boat of any size or type before, he has surprised himself with the high standard of work that he has achieved.

Kevin Agee's "Inlet Runner" 16ft garvey nearing completion.

We are also using this opportunity to do the official launch of my new book "South Atlantic Capsize - Lessons Taught by a Big Ocean Wave". We will have copies on hand at a special show price and you may be able to pin me down long enough to sign your copy. Special show price only to those who visit us at the show.

To see more about our boat designs, please visit our main website or our new mobile website.

Every now and then a boat catches my attention and I think "Hmm, I wouldn't mind owning that boat myself". Such a thought crossed my mind when I saw photos of "Day Dream". She is a Didi 40cr, essentially the same as the Didi 38 "Black Cat" that I built and sailed for so many thousands of miles, but with extended stern and a bit more accommodation space.

Fast as "Black Cat" is, "Day Dream" has the potential to be still faster. She has the same very slippery hull but her extended stern increases her speed potential. She has the same powerful but easily-handled rig, with a bit less draft, for better access to shallower cruising grounds.

"Day Dream" in the slings, showing off her clean lines

She was professionally-built in Antalya, Turkey, with CE certification. She has a radius chine plywood hull with fibreglass deck. She was a custom build, so the builder has made a few styling changes from my design but overall the boat looks really nice. I see European influences and features that are fine for local cruising in the Med. With my own preference for ocean voyages, I would modify the navigation and galley areas to better suit my own needs.

Nicely fitted out, with clean and comfortable saloon

Clean galley, styled for local cruising.

The asking price for "Day Dream" is not much more than the material cost of building such a boat, at US$60,000. If I had the cash available, I would be sorely tempted. If she rattles your cage enough to want to investigate further, contact me by email. I will put you in contact with the owner for more information.

Not the greatest sailing photo but the best that I have.

To view this and our other designs, visit http://dixdesign.com/.

I wrote in January about the 16ft plywood garvey being built by Kevin Agee. Kevin is progressing nicely and benefitting from the very welcome spring that has finally arrived and eased out the rather brutal winter. Now it is easier to do woodwork and epoxy cures much faster, so work progresses more quickly. Epoxy coatings in the sealed spaces are being completed and this weekend the deck will be glued on.

Hull skin completed, interior details being fitted.

Supports for battery box and fuel tank.

Deck stringers going in, test fitting of fuel tank.

Bottom runners serve as stringers and bottom protection.

Dry-fitting deck, ahead of final installation this weekend.

Kevin Agee is doing a nice job of his project and will display it in the "I Built It Myself" section of the Wooden Boat Show at Mystic Seaport at the end of June. If you want to see this boat, that will be the place to do it.

Plans are not yet ready for selling but should be in a month or two. We will offer it as plans and instructions, with options of full-size patterns or a pre-cut plywood kit.

To see our designs for your next amateur project, please visit our website at http://dixdesign.com .

The long-awaited day arrived this weekend. Jim Foot, in Port Elizabeth, South Africa, launched his self-built DS15 at Algoa Bay Yacht Club. He started with a pre-cut plywood kit supplied by CKD Boats in Cape Town and took approximately 6 months of his spare time from start to launch.

DS15 "Bateleur" about to get wet for the first time.

 Despite the very light wind, they had good sailing and were impressed by performance. Jim's first comments are:-

She sails beautifully and she is fast. Beating into a chop in light wind this am going at about 3,7 kts felt happy. Then was told wind spd 4 kts by passing boat quite amazing.

I designed the Didi 29 Retro for Mike Kopman, a professional charter skipper who lives in my hometown of Hout Bay, South Africa. Mike's concept was to adapt the Didi 26 cruiser/racer design to a more traditional concept, with counter stern, bulwarks, boxy trunk cabin and a big gaff rig, for participation in the Caribbean classic racing circuit. Mike received the first CNC kit to this design, supplied by CKD Boats in South Africa. The second kit went to Bruce Mierke of Murphy, North Carolina, which he ordered from our list of plywood kits.

Mike Kopman has been building his workshop ahead of the boatbuilding project, so that hasn't started yet. Bruce Mierke started his boat a few months ago and is moving along very well. These photos are of Bruce's build. He began with some smaller items ahead of starting the hull, so I am showing those first.

Rudder

Foil of lifting keel

Beaver-tail ballast bulb

Carbon spars for gaff rig.

Bulkheads and framework set up on building stocks.

Bottom panels installed, rudder cassette and Torqueedo test-fitted

Radiused section of skin completed.

Aft view, with hardwood-veneered transom

Plug of engine well and rudder cassette in place.

I have been working intermittently on a new 16ft design for awhile, the start of a range of small powerboats for protected water use. The design is still a way off being complete but the prototype is already being built by Kevin Agee in Hampton, Virginia and is progressing well.

I am using a garvey-type hull that can be easily built from either plywood or aluminium. It has Vee'd sections forward to soften the ride in a bit of a chop, with twisted bottom panels that run out to a shallow V at the transom for easy planing.

The version that Kevin is building has a self-draining wet deck with swivel seats on bases bolted to the deck. It has integral floodable tanks under the deck to hold bait and catch.There will also be a "sit-inside" version with bench seats, with the tanks under the seats.

Kevin is building from okoume plywood, cut from full-size paper patterns that we have supplied. When the design is complete then we will also offer plywood kits, cut by CNC machine. The photos below show the basics of construction as far as it has gone to date.

Bottom panels with slots for bulkhead tabs

Glass-taping joints in panels.

Bottom panels stitched together & bulkheads set up

Sides added and stitched to bottom

Foredeck added and stitched in.

Turned over and laid flat, ready to epoxy seams.

Why would anyone build a boat? What kind of question is that for a boat designer to ask? I ask it because there are so many people who ask it in all seriousness. They ask it because they really can't understand why anybody would build a boat instead of buying one. There are so many boats out there that are available and can be acquired with so much less effort, new boats, good used boats, boats that have been damaged in weather events, tired boats that can be rejuvenated and almost dead boats that can be resuscitated.

There is no single answer to that question, there are many reasons why people build boats for themselves and each builder no doubt has a bunch of these reasons rolled up inside whatever it is that drives him to build his boat.

A reason that is common to all of the builders is passion. They have a passion to create a boat, to create something that would never have existed were it not for them and their desire to do this. Having been there myself many times, I can attest to the fantastic feelings that flood through when we first put that new boat into the water and then to give it life by hoisting sail or opening the throttle for the first time. If you think about how wonderful you felt when you first used a new boat that you had bought, doing the same in a boat that you have created with your own hands intensifies those feelings in ways that can't be described.

Petr Muzik built his Shearwater 39 then circumnavigated in his 70's.

It is that passion that also drives many of the decisions that are made during the build project. It drives them to do quality work because they want to feel pride in the final product. They want their creation to show well when seen by others, to be seen as a thing of beauty. Those who have never thought to build a boat themselves look at it and say "Wow, did you build that?".

Financial restraints are behind many amateur boatbuilding projects. If you need or want a new (as in not pre-owned) boat that costs double the money that you can afford to put into it, then the only route to get it is to build it yourself. I have never calculated ahead of my boatbuilding projects how much they are going to cost. Each time I have just dived right in and started, then kept going to the end. That was when I found out what the total cost was and was able to compare with what it would have cost me to buy an equivalent new pop-out production boat. Each time the cost of my fully-equipped boat was around 45% of the cost of a base-package for a production boat of similar size and concept.

Those who don't get it say "It cost you a lot more, you haven't priced in your labour hours, which must be priced at your professional rate of pay". No, we don't price our labour into the project and no, we should not price it at the rate that we receive in our paying jobs, whatever they may be. The project serves as a hobby, as recreation that helps us to recover from a tough week working for someone else. It helps to keep us motivated and able to take on the world. The alternative of working very extended hours at our paying jobs to generate the funds to pay someone else to build our boat brings with it a risk of getting burned out in the process.

Andrew Morkel built his Argie 15. Now he and his family are learning to sail in it.

Many people who build big boats for long distance cruising want to build it themselves to give them confidence in the strength of the boat. They know that they will be sailing their boat on very remote waters, far from rescue services and possibly with their beloved family aboard. The safety of all depends on the quality of the build and they don't want to leave that to people whom they don't know. They have vested interest in doing everything in the best manner possible, so they want to do it themselves. In the process they garner the side benefit of knowing intimately how the boat works, where all of the important parts are, how to get to every seacock or filter in a hurry when dictated by some emergency that may develop onboard. They know exactly how to repair everything onboard because they installed it in the first place. They are likely to lay out all aspects in a very sensible and logical manner because they will have to maintain it themselves. At sea in a storm is not the best time to be trying to track down plumbing or electrical faults in systems that are overly obscure because the person who installed them before the hull liners or lockers were installed didn't consider the problems of working on them in the completed boat.

Others build their own boats because they want something different,  a boat that will stand out from the crowd on marinas, at sea and in distant anchorages. They add personal styling features to fit their own characters and they choose joinery detailing such as is not available from production boatbuilders.

Sergey Federov built his Hout Bay 33 to a very high standard.

Some people choose to build a boat purely for the hobby benefit. They enjoy the build more than using the boat, so the project will be drawn out interminably. They produce exceptional quality in the process but will probably sell the boat when completed or soon after.

It has been said many times that the happiest days of a boatowner's life are when he buys and when he sells the boat. The exception to that cliche is the boatowner who has built his boat himself. There is so much of the builder wrapped up in that boat, in the form of blood, sweat and tears, to say nothing of chunks of skin and body hair, that he and the boat have an affinity and  intimacy that is unknown to those who buy their boats. I have felt very sad when selling each of the boats that I have built, far from the happiest days of my life.

It has also been said many times that boatbuilding is a disease and when you have had it, you will experience periodic relapses. I have to agree with this one, I have had numerous relapses. I can't say that I have suffered relapses, as would apply to most diseases, I have enjoyed those relapses too much to convince my wife that I have suffered in any way. And this is the way that most amateur boatbuilders feel. Visit any of the many boat shows that cater for amateur boatbuilders and you will see for yourself how much they love what they do and just how much passion they build into their projects.

To see our range of designs, for amateur or professional boatbuilding, please go to http://dixdesign.com.

Tiernan Roe is a professional boatbuilder in County Cork, Ireland. His company, Roeboats, specialises in building quality wooden boats. Mostly of classic styling, they build for sail, power or rowing. Roeboats recently launched a Cape Henry 21 that they built for a customer from France.Tiernan sent me these photos, which show some interesting details brought into one of our most popular small cruisers.

Cape Henry 21 ready to get wet.

Launched in a pretty setting.

First sail of the new boat.

The mainsail has still to be fully set up in these photos.

Compact sink & cooker unit, neatly executed.

Other side of the galley. Nice detailing.

Looking aft from the double forward berth.

You can follow the construction of this boat on the Roeboats news blog, from start through to launch.

After launch, Tiernan Roe sent me these comments. "She sails very nicely and I found her easy to single hand from the get go. The interior is pretty snazzy with frame and panel oak fronted drawers and a gas stove with tank fed sink.  Also the centreboard was a lot easier to operate than I thought. It's an awkward shape out of the boat to try and move alone."

To see our full range of designs, please visit http://dixdesign.com/